|
|||||
|
|
Fabrication and oxidation behavior of Cr2AlC coating on Ti6242 alloy |
|
| Authors: | Q.M. Wang A. Flores Renteria R. Mykhaylonka W. Garkas |
| Affiliation: | a Technical University of Brandenburg at Cottbus, Konrad-Wachsmann-Allee 17, 03046 Cottbus, Germany b Division of Surface Engineering Materials, Institute of Metal Research, 72 Wenhua Road, Shenyang, PR China c Materials Chemistry, RWTH Aachen University, Kopernikusstraße 16, D-52074 Aachen, Germany |
| Abstract: | An ∼ 5 µm Cr2AlC coating was synthesized on near-α titanium alloy Ti6242 using an industrially sized magnetron sputtering coater. Isothermal oxidation at 700 °C and 800 °C, and cyclic oxidation at 700 °C of the bare alloys and coated specimens were investigated in air. The results indicated that the Ti6242 alloy faced serious oxidation problems at 700 °C and 800 °C. Repeated formation and spallation of the multilayered oxide scale on the Ti6242 alloy occurred during oxidation testing. The coated specimens exhibited much better oxidation behaviour as compared to the bare alloy. A continuous Al-rich oxide scale formed on the coating surface during the initial oxidation stages. The oxide scale and coating itself acted as diffusion barriers blocking the further ingress of oxygen and protected the substrate alloy from oxidation. The oxidation mechanisms of the bare alloy and the coated specimens were investigated based on the experimental results. |
| Keywords: | Cr2AlC coating MAX-phase Near-α titanium alloy Oxidation |
| 本文献已被 ScienceDirect 等数据库收录！ | |