| 带钢冷轧机工作辊表面粗糙度实测研究 |
| |
| 引用本文： | 吴越,张清东,刘军,戴江波,林秀贞,吴彬. 带钢冷轧机工作辊表面粗糙度实测研究[J]. 机械工程学报, 2003, 39(11): 90-94 |
| |
| 作者姓名： | 吴越 张清东 刘军 戴江波 林秀贞 吴彬 |
| |
| 作者单位： | 1. 北京科技大学机械工程学院,北京,100083
2. 宝山钢铁股份有限公司 |
| |
| 摘 要： | 通过大量跟踪实测工作辊和带钢表面粗糙度,深入分析了带钢表面粗糙度的影响因素和变化规律,运用逐步回归法建立了冷轧带钢表面粗糙度预测数学模型和转印率模型,进而建立了轧辊表面粗糙度衰减规律模型。这些模型可以用于生产中预测轧后带钢表面粗糙度、合理安排带钢轧制顺序、决定工作辊下机时间和修正轧制力计算模型。
|
| 关 键 词： | 冷轧带钢 轧制力 表面粗糙度 逐步回归分析 |
| 修稿时间： | 2003-06-27 |
TEST AND STATISTICAL RESEARCH OF SURFACE ROUGHNESS OF WORK ROLL IN COLD TANDEM MILLS |
| |
| Wu Yue Zhang Qingdong Liu Jun Dai Jiangbo. TEST AND STATISTICAL RESEARCH OF SURFACE ROUGHNESS OF WORK ROLL IN COLD TANDEM MILLS[J]. Chinese Journal of Mechanical Engineering, 2003, 39(11): 90-94 |
| |
| Authors: | Wu Yue Zhang Qingdong Liu Jun Dai Jiangbo |
| |
| Affiliation: | Wu Yue Zhang Qingdong Liu Jun Dai Jiangbo (University of Science and Technology Beijing)Lin Xiuzhen Wu Bin (Baoshan Iron & Steel Co. Ltd.) |
| |
| Abstract: | The law of strip surface roughness formation as well as its influence factors is analyzed thoroughly by test and statistical research of surface roughness of work roll and steel strip, the mathematics model to predict strip surface roughness and the mathematics model to estimate the transferring ratio are established by means of stepwise regression, finally the model of roll surface roughness attenuation rule is established. The models can be used to predict strip surface roughness, arrange steel strip rolling order reasonably, decide the time of work roll off mill and modify the calculation model of rolling force. |
| |
| Keywords: | Cold strip Rolling force Surface roughness Stepwise regression |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
