Dielectric strength coordination and generalized spacer design rules for HVAC/DC SF/sub 6/ gas insulated systems

The problems of HVAC/DC gas insulated systems (GIS) dielectric strength coordination and support spacers design criteria are discussed in this paper. The most important challenge is to protect the spacers against flashover and consequently exclude them from consideration when coordinating an insulation of GIS. Both experimental and numerical studies demonstrate that electric field formation mechanisms and insulation behavior at SF/sub 6//epoxy interface are substantially different for AC and DC voltage excitations. Nevertheless, in actual power systems, HVDC apparatus are frequently subjected to impulse and time-varying voltages, implying capacitive field grading, and vice versa, HVAC apparatus can actually be subjected to harmful pseudo-DC voltages occurring in certain operating modes. Therefore, the above-mentioned problem is considered in order to find generalized criteria which will provide a reliable spacer performance in both HVAC/DC gas insulated systems. To illustrate the specificity of SF/sub 6//epoxy insulation behavior at HVDC stress, static V-T characteristics for post-type spacer models were studied experimentally. Dielectric strength coordination requirements and constraints arising for AC/DC GIS conditions were discussed. Some design and technological alternatives directed to improve the DC spacer reliability were analyzed. Based on these results, generalized design criteria for AC/DC conical and post type spacers were formulated. For conventional range of GIS operating stress and insulation parameters, it has been shown that proposed design rules can be realizable with no additional enlargement of apparatus dimensions. Such an approach provides unification and interchangeability of support spacers in HVAC/DC SF/sub 6/ apparatus, which could be technologically worthwhile and economically beneficial for manufacturers and power utilities.