A study on the analysis of O-ring under uniform squeeze rate and internal pressure by photoelastic experimental hybrid method

There are three kinds of loading conditions applied to the O-ring, The first loading condition is the case in which uniform squeeze rates are applied to the upper side and the lower side of the O-ring (the strain condition). The second loading condition is the case in which uniform squeeze rates are applied to the upper side and the lower side of the Oring and other squeeze rates are applied to the front side of the O-ring. The third loading condition is the case in which uniform squeeze rates are applied to the upper side and the lower side of the O-ring, other squeeze rates are applied to the front side of the O-ring, and internal pressures are applied to another front side of the O-ring(loading condition is the combination of stress condition and the strain condition). In this research, a new photoelastic experimental hybrid method under the third loading condition was developed and it was verified. The stresses of the O-ring under the third loading condition were analyzed by the new photoelastic experimental hybrid method developed in this research. The internal pressures applied to the O-ring were 0.98 MPa, 1.96 MPa, 2.94 MPa and 3.92 MPa. This paper was recommended for publication in revised form by Associate Editor Jooho Choi Jai-Sug Hawong received a B.S. degree in Mechanical Engineering from Yeungnam University in 1974. Then he received his M.S. degree and Ph.D. degree from Yeungnam University in Korea in 1976 and from Kanto Gakuin University in Japan in 1990, respectively. Prof. Hawong is currently a professor at the school of Mechanical Engineering at Yeungnam University, in Gyeongsan city, Korea. He is currently serving as an vise-president of Korea Society Mechanical Engineering. Prof. Hawong’s research interests are the areas of static and dynamic fracture mechanics, stress analysis, experimental mechanics for stress analysis and composite material etc.