| 镁合金杯杆件等温复合挤压研究 |
| |
| 引用本文： | 付传锋,何孝成,谢平枢,陈江涛,夏华.镁合金杯杆件等温复合挤压研究[J].塑料制造,2006(5):39-41. |
| |
| 作者姓名： | 付传锋 何孝成 谢平枢 陈江涛 夏华 |
| |
| 作者单位： | 重庆工学院材料科学与工程学院,重庆400050 |
| |
| 基金项目： | 重庆市自然科学基金项目,编号8650 |
| |
| 摘 要： | 分析了镁合金的成形性能。合理选择实验设备与装置、恰当的挤压工艺。通过镁合金在不同成形温度和壁厚条件下的等温复合挤压实验。并对实验结果进行分析。从而得知镁合金在等温复合挤压条件下的成形性能较好。
|
| 关 键 词： | 镁合金 等温 复合挤压 成形性能 |
THE COMPOUND EXTRUSION OF MAGNESIUM ALLOY CUP POLE UNDER CONSTANT TEMPERATURE |
| |
| Fu Chuan-feng, He Xiao-cheng,Xie Ping-shu,Chen Jian-tao,Xia Hua.THE COMPOUND EXTRUSION OF MAGNESIUM ALLOY CUP POLE UNDER CONSTANT TEMPERATURE[J].Plastics Manufacture,2006(5):39-41. |
| |
| Authors: | Fu Chuan-feng He Xiao-cheng Xie Ping-shu Chen Jian-tao Xia Hua |
| |
| Abstract: | Through the forming property of magnesium alloy,we choosed the experiment equipment and installs following which we determined the extrusion craft. And then we did several experiment which is under the different temperature and wall thick terms. We analysised the result of the experiment from that we draw the forming property of magnesium alloy in constant temperature and compound extrusion terms is better. |
| |
| Keywords: | magnesium alloy constant temperature compound extrusion forming property |
| 本文献已被 维普 等数据库收录！ |
|
