|
|||||
|
|
| 基于成形工具姿态调整的适应性积层制造技术研究 | |
| 引用本文： | 孙玉文,刘伟军,王越超,贾振元.基于成形工具姿态调整的适应性积层制造技术研究[J].高技术通讯,2003,13(2):55-59. |
| 作者姓名： | 孙玉文 刘伟军 王越超 贾振元 |
| 作者单位： | 1. 大连理工大学机械工程学院,大连,116024;中国科学院机器人学开放研究实验室,沈阳,110016 2. 中国科学院机器人学开放研究实验室,沈阳,110016 3. 大连理工大学机械工程学院,大连,116024 |
| 基金项目： | 国家自然科学基金 ( 5 9975 0 15 )，辽宁省自然科学基金 ( 2 0 0 110 2 0 87)资助项目。 |
| 摘 要： | 当前的积层制造技术主要采用2.5D切片。成形中台阶效应不可避免，本文提出了一种新的基于3D切片的适应性成形方法。通过增加成形工具的运动自由度，使之能根据实体的几何外形自动调整姿态，从而有效地克服了台阶效应对成形精度的影响。在保持同等成形精度的前提下。采用适应性斜切成形技术可以使用更厚的层片。提高成形效率，实现了成形精度和速度的兼得。 |
| 关 键 词： | 成形工具 姿态调整 适应性积层制造技术 快速原型制造 分层 CAD CAM 直纹面 斜切成形 成形机 |
Research on Technique of Adaptively Laminated Manufacturing Based on Adjusting the Posture of Laminated Tool |
|
| Sun Yuwen Liu Weijun Wang Yuechao Jia Zhenyuan Dalian University of Technology,Dalian Robotics Laboratory,Chinese Academy of Science,Shenyang.Research on Technique of Adaptively Laminated Manufacturing Based on Adjusting the Posture of Laminated Tool[J].High Technology Letters,2003,13(2):55-59. | |
| Authors: | Sun Yuwen Liu Weijun Wang Yuechao Jia Zhenyuan Dalian University of Technology Dalian Robotics Laboratory Chinese Academy of Science Shenyang |
| Affiliation: | Sun Yuwen Liu Weijun ** Wang Yuechao ** Jia Zhenyuan Dalian University of Technology,Dalian 116024) Robotics Laboratory,Chinese Academy of Science,Shenyang 110015) |
| Abstract: | Current laminated manufacturing techniques are mainly 2.5 dimension slices. So, the staircase effect in rapid prototyping processes is unnevitable. In this paper, an adaptive slicing method based on 3 dimension slices is discrible in detail. Through increasing the degree of freedom by tilting the laminated tool of RP machine, those slices achieved by line interpolation between adjacent contours can more closely match the designed surface shape than the zero order approximation. The results of sometest show that the new method may significantly reduce build time and improve the surface finish through the use of thicker sloping layers for the same userdefined error. |
| Keywords: | Rapid prototyping technology Slice CAD/CAM Ruled surface |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |