| 镁、铝对摩托车轮毂服役应力状态的影响 |
| |
| 引用本文： | 吴立鸿,龙思远,徐绍勇,陈荣石. 镁、铝对摩托车轮毂服役应力状态的影响[J]. 材料科学与工艺, 2007, 15(3): 397-400 |
| |
| 作者姓名： | 吴立鸿 龙思远 徐绍勇 陈荣石 |
| |
| 作者单位： | 重庆大学,机械工程学院,重庆,400044;中国科学院,金属研究所,辽宁,沈阳,110015 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 用轻质材料替代一直是缩减轮毂质量、实现轮毂轻量化的一种有效方法.镁合金以其优越的性能和广阔的应用前景而成为当前替代材料的首选.为探索不同材料性能对服役应力的深层影响,在摩托车铝合金轮毂结构基础上,应用有限单元法对替代后的镁合金轮毂进行应力分析.并与相同服役状态下铝合金轮毂的分析结果进行对比.结果表明:轮毂材料用镁合金替代后,应力分布变得均匀,交变应力峰值变化趋于平缓,为今后轮毂结构再设计提供了力学依据.
|
| 关 键 词： | 镁合金 铝合金 轮毂 有限元法l应力分析 |
| 文章编号： | 1005-0299（2007）03-0397-04 |
| 修稿时间： | 2004-08-23 |
Influences of Mg alloy and Al alloy on servicex stress in motorcycle wheel |
| |
| WU Li-hong,LONG Si-yuan,XU Shao-yong,CHEN Rong-shi. Influences of Mg alloy and Al alloy on servicex stress in motorcycle wheel[J]. Materials Science and Technology, 2007, 15(3): 397-400 |
| |
| Authors: | WU Li-hong LONG Si-yuan XU Shao-yong CHEN Rong-shi |
| |
| Affiliation: | 1. College of Mechanic Engineering, Chongqing University, Chongqing 400044, China;2. Institute of Metal Research Chinese Academy of Sciences, Shenyang 110015 ,China |
| |
| Abstract: | Reducing wheel mass by replacement of higher density materials with lower ones is always an effective way of making wheel lighter.Mg-alloy with superior properties and wide application outlook makes itself the first replacement material.In order to research influences of different material properties on service stress,service stress of wheel replaced with Mg alloy was analyzed with finite element method(FEM) on the basis of Al-alloy wheel structure analyzed before.The both analysis results under the same service conditions were compared.It was demonstrated that wheel stress distribution became more ideal,stress curve trended to be more uniform by replacement of Al alloy with Mg alloy and mechanics evidence of wheel structural redesign was offered in the future. |
| |
| Keywords: | Mg alloy Al alloy Motorcycle wheel FEM stress analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
