Corrosion of furnace wall materials in waste-wood fired power plant

Abstract

Corrosion tests were performed with four different materials exposed at the furnace wall in a power boiler burning recycled wood, with the aim of evaluating coatings to reduce the corrosion. The nickel base Alloy 625 and the iron–chromium–aluminium alloy Kanthal APMT had the lowest corrosion rates followed by the stainless steel 310S. The low alloy steel 16Mo3, from which the walls are constructed, had the highest rate. Different corrosion mechanisms were found to occur according to the alloy type. Thermodynamic modelling showed that chlorine gas exists at extremely low levels under the prevailing conditions and the hydrated form is thermodynamically favoured.