Monolithically integrated HgCdTe focal plane arrays

The cost and performance of hybrid HgCdTe infrared (IR) focal plane arrays are constrained by the necessity of fabricating the detector arrays on a CdZnTe substrate. These substrates are expensive, fragile, available only in small rectangular formats, and are not a good thermal expansion match to the silicon readout integrated circuit. We discuss in this paper an IR sensor technology based on monolithically integrated IR focal plane arrays that could replace the conventional hybrid focal plane array technology. We have investigated the critical issues related to the growth of HgCdTe on Si read-out integrated circuits and the fabrication of monolithic focal plane arrays: (1) the design of Si read-out integrated circuits and focal plane array layouts; (2) the low-temperature cleaning of Si(001) wafers; (3) the growth of CdTe and HgCdTe layers on read-out integrated circuits; (4) diode creation, delineation, electrical, and interconnection; and (4) demonstration of high yield photovoltaic operation without limitation from earlier preprocessing such as substrate cleaning, molecular beam epitaxy (MBE) growth, and device fabrication. Crystallographic, optical, and electrical properties of the grown layers will be presented. Electrical properties for diodes fabricated on misoriented Si and readout integrated circuit (ROIC) substrates will be discussed. The fabrication of arrays with demonstrated I–V properties show that monolithic integration of HgCdTe-based IR focal plane arrays on Si read-out integrated circuits is feasible and could be implemented in the third generation of IR systems.