|
|||||
|
|
| 基于端面滚切法加工的锥齿轮齿面测量研究 | |
| 引用本文： | 聂少武,邓效忠,李天兴,邓静,周广才. 基于端面滚切法加工的锥齿轮齿面测量研究[J]. 机械传动, 2011, 35(10): 42-46 |
| 作者姓名： | 聂少武 邓效忠 李天兴 邓静 周广才 |
| 作者单位： | 1. 西北工业大学机电学院,陕西,西安,710072 2. 河南科技大学机电工程学院,河南,洛阳,471003 3. 哈尔滨精达测量仪器有限公司,黑龙江,哈尔滨,150078 |
| 基金项目： | 国家自然科学基金资助项目(50675061) |
| 摘 要： | 针对端面滚切法加工的锥齿轮齿形精度问题,在国产齿轮测量中心上对齿面偏差测量方法进行了研究.分析了测量原理,规划了测量区域和测量路径,建立了锥齿轮端面滚切法切齿数学模型,计算出了理论齿面.对测头半径和测杆变形进行了坐标补偿,通过齿轮与浏量机坐标转换,得到了控制测量动作的测头中心理论位置,根据实际测量值建立了齿面偏差方程.... |
| 关 键 词： | 端面滚切法 锥齿轮 理论齿面 齿面偏差 测量软件 |
Tooth Surface Measurement of Bevel Gear based on Face Hobbing |
|
| Nie Shaowu,Deng Xiaozhong,Li Tianxing,Deng Jing,Zhou Guangcai. Tooth Surface Measurement of Bevel Gear based on Face Hobbing[J]. Journal of Mechanical Transmission, 2011, 35(10): 42-46 | |
| Authors: | Nie Shaowu Deng Xiaozhong Li Tianxing Deng Jing Zhou Guangcai |
| Affiliation: | Nie Shaowu1 Deng Xiaozhong2 Li Tianxing1 Deng Jing1 Zhou Guangcai3(1 School of Mechanical Engineering,Northwestern Polytechnical University,Xi'an 710072,China)(2 School of Mechatronics Engineering,Henan University of Science and Technology,Luoyang 471003,China)(3 Haerbin Jingda Measuring Instruments Co.,Ltd,Harbin 150078,China) |
| Abstract: | Aiming at tooth surface accuracy of bevel gear by face hobbing,the tooth surface error measuring is studied on domestic gear measurement center.The measuring principle is analyzed,and the measuring area and measuring path are planned,and the mathematical model of the bevel gear is established,and the theoretical tooth surface is calculated.The coordinates of probe radius and deformation are compensated,through coordinate transformation between work system and measuring machine system,and the theoretical coo... |
| Keywords: | Face hobbing Bevel gear Theoretical tooth surface Tooth surface error Measuring software |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |