| 300MW锅炉汽包筒体水侧纵向裂纹形成机理 |
| |
| 引用本文： | 何建军,陈荐,李光.300MW锅炉汽包筒体水侧纵向裂纹形成机理[J].中国电力,2011,44(5):56-59. |
| |
| 作者姓名： | 何建军 陈荐 李光 |
| |
| 作者单位： | 1. 长沙理工大学,能源与动力工程学院,能源高效清洁利用湖南省高校重点实验室,湖南,长沙,410076
2. 湖南省电力公司试验研究院,湖南,长沙,410007 |
| |
| 基金项目： | 国家自然科学基金资助项目，湖南省高校重点实验室开放基金资助项目 |
| |
| 摘 要： | 某电厂300 MW机组锅炉汽包中锅筒水侧出现多条纵向裂纹。通过对裂纹附近的金相组织、残余应力、硬度以及运行工况的研究,分析了裂纹形成的原因。研究结果表明:汽包裂纹附近材料珠光体中碳化物球化,球状的碳化物聚集在合金铁素体的晶界上部分连成链状组织;裂纹位于筒体瓦片压制过程中形成的较深的纵向沟痕附近,在这些部位附近出现较高的应力集中;由于水位线的波动和变负荷运行产生的交变热应力导致水位线附近部位萌生低周疲劳裂纹;母材裂纹形成的主要原因是筒体中局部的应力集中、较大的交变热应力、材料组织变化以及锅水应力腐蚀的综合作用。
|
| 关 键 词： | 300MW锅炉 汽包 SA299钢 裂纹 残余应力 |
Formation mechanism of longitudinal cracks in drum's water-side of 300 MW boiler |
| |
| HE Jian-jun,CHEN Jian,LI Guang.Formation mechanism of longitudinal cracks in drum's water-side of 300 MW boiler[J].Electric Power,2011,44(5):56-59. |
| |
| Authors: | HE Jian-jun CHEN Jian LI Guang |
| |
| Affiliation: | HE Jian-jun1,CHEN Jian1,LI Guang2(1.School of Energy and Power Engineering,Key Laboratory of Efficient and CleanEnergy Utilization,Changsha University of Science and Technology,Changsha 410076,China,2.Hunan Electric Power Company Test&Research Institute,Changsha 410007,China) |
| |
| Abstract: | A number of longitudinal cracks were detected in drum's water-side of a 300 MW boiler.The microstructures,residual stress, hardness of the drum near the cracks,and operating processes of the 300 MW thermal power generating unit were studied to explore the cause of crack formation.The results show that since carbides from the pearlite of the steel near the cracks were spheroidized,these spherical carbides gather in the alloy ferrite grain boundaries and parts of them connect into a chain organization.Crack i... |
| |
| Keywords: | 300 MW boiler drum SA299 steel crack residual stress |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
