| 光电二极管一维阵列信号采集非标准制式的实现 |
| |
| 引用本文： | 沈凤光,蔡丽.光电二极管一维阵列信号采集非标准制式的实现[J].河北煤炭,2000(1):43-45. |
| |
| 作者姓名： | 沈凤光 蔡丽 |
| |
| 作者单位： | 中国矿业大学北京校区自动化系!北京100083 |
| |
| 摘 要： | 在强力输送带横向断裂预报系统基础上，对部分硬件电路优化设计，碘化铯光电二极管为光电转化器件，ＣＤ４０５１为多路模拟开关，７４ＬＳ１６３计数器为地址发生器，根据需要置成相应的计数器，产生相应的地址，从而实现了光电二极管一维阵列信号采集的非标准制式，使强力输送带横向断裂预报系统能检测不同带宽的输送带。
|
| 关 键 词： | 非标准制式 光电二极管 输送带 信号采集 |
Realization of nonstandard mode of signal collection of photoelectric diode one-dimension array |
| |
| SHEN Feng-guang,CAI Li.Realization of nonstandard mode of signal collection of photoelectric diode one-dimension array[J].Hebei Coal,2000(1):43-45. |
| |
| Authors: | SHEN Feng-guang CAI Li |
| |
| Abstract: | On the basis of conveyor belt transverse failure prediction system, the design of parts of hardware cuicuit is optimized. The CsI photoelectric diode is used for photoelectric conversion CD4051, a multiplex analog switch, the 74LS163 counter,an address generator. According to the need of practice, 74LS163 is set to corresponding counter, which can realize nonstandard mode of the signal collection of photoelectric diode one dimension array. Thus the conveyor belt prediction system can detect belts in different width. |
| |
| Keywords: | one dimension array photoelectric convension sequential collection non-standard mode |
| 本文献已被 CNKI 维普 等数据库收录！ |
