| 关于提高镀层粘附性的探讨 |
| |
| 引用本文： | 朴明魁,王溪钢.关于提高镀层粘附性的探讨[J].轧钢,1999(3):17-19. |
| |
| 作者姓名： | 朴明魁 王溪钢 |
| |
| 作者单位： | 本溪钢铁(集团)冷轧薄板有限公司,辽宁,本溪,117000 |
| |
| 摘 要： | 介绍了连续热镀锌镀层粘附的机理，并结合生产实际研究了影响镀层粘附性的工艺因素，即原料表面状态、炉内气氛、锌液成分及镀锌工艺参数等，同时提出了改进不良粘附性的措施。
|
| 关 键 词： | 镀锌板 镀层 粘附性 |
| 修稿时间： | 1998-06-22 |
Research on improving the adhesion of zinc coat |
| |
| PIAO Mingkui,WANG Xigang.Research on improving the adhesion of zinc coat[J].Steel Rolling,1999(3):17-19. |
| |
| Authors: | PIAO Mingkui WANG Xigang |
| |
| Abstract: | The mechanism of zinc coat adhesion of continuous hot galvanizing is introduced. Combining with practicalproduction, the influence factors on adhesion, such as the surface appearance of strip, gases of annealing furnace,composition of zinc solution and technology parameters of galvanizing, etc., are studied. Mean while, some measureshave been put forward to improve the adhesion of zinc coat. |
| |
| Keywords: | galvanized sheet zinc coat adhesion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
