| 基于区域性等段数剖分方法的轮胎断面有限单元网格的自动生成 |
| |
| 引用本文： | 宋君萍,刘丽,马连湘.基于区域性等段数剖分方法的轮胎断面有限单元网格的自动生成[J].青岛科技大学学报,2004,25(6):520-524. |
| |
| 作者姓名： | 宋君萍 刘丽 马连湘 |
| |
| 作者单位： | 青岛科技大学机电工程学院 山东青岛266042
(宋君萍，刘丽)，青岛科技大学机电工程学院 山东青岛266042(马连湘) |
| |
| 摘 要： | 在已形成轮胎断面结构图的基础上 ,用有限单元法并依据轮胎断面结构特点 ,采用区域性等段数剖分方法实现了轮胎断面有限单元网格的自动生成 ,获得了单元信息。并对区域性等段数剖分方法及有限单元网格的生成过程及网格剖分结果进行了分析。
|
| 关 键 词： | 轮胎 有限单元法 有限单元网格 区域性等段数剖分方法 |
| 文章编号： | 1672-6987(2004)06-0520-05 |
| 修稿时间： | 2004年6月8日 |
The Automatic Generation of Finite Element Meshes of the Tire Cross-section Based on the Same Segments Dividing Method |
| |
| SONG Jun-ping,LIU Li,MA Lian-xiang.The Automatic Generation of Finite Element Meshes of the Tire Cross-section Based on the Same Segments Dividing Method[J].Journal of Qingdao University of Science and Technology:Natutral Science Edition,2004,25(6):520-524. |
| |
| Authors: | SONG Jun-ping LIU Li MA Lian-xiang |
| |
| Abstract: | On the basis of the tire cross-section drawing, the automatic generation of finite element meshes of the tire cross-section is realized by using the same segments dividing method and the corresponding element information is obtained according to the structural characteristics of the tire cross-section. The same segments dividing method and its merits are introduced briefly. The process of the automatic generation of finite element meshes and the dividing results of meshes are analyzed. |
| |
| Keywords: | tire finite element method finite element meshes the same segments dividing method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
