首页 | 本学科首页   官方微博 | 高级检索  
     

Pb-0.3%Ag-0.06%Ca三元合金阳极在锌电积过程中的电化学行为--循环伏安曲线研究
引用本文:杨海涛,陈步明,郭忠诚,徐瑞东. Pb-0.3%Ag-0.06%Ca三元合金阳极在锌电积过程中的电化学行为--循环伏安曲线研究[J]. 昆明理工大学学报(自然科学版), 2013, 0(5): 1-5,27
作者姓名:杨海涛  陈步明  郭忠诚  徐瑞东
作者单位:[1]昆明理工大学冶金与能源工程学院,云南昆明650093 [2]昆明理工恒达科技有限公司,云南昆明650022 [3]云南省复杂有色金属资源清洁利用国家重点实验室培育基地,云南昆明650093
基金项目:国家自然科学基金(51004056);中国科学院特种无机涂层重点实验室开放基金(KKZ6201152009);高等学校博士学科点专项科研基金资助课题(20125314110011);云南省应用基础研究基金(2010ZC052);昆明理工大学分析测试基金(2011173)
摘    要:Pb-0.3% Ag-0.06% Ca三元轧制合金阳极在酸性硫酸锌溶液中进行了360h(15 d)的恒电流极化.通过循环伏安技术研究分析了恒电流极化过程中合金阳极的电化学行为的变化.通过X射线衍射技术分析了合金阳极在恒电流极化过程中形成的氧化膜物相.结果表明:合金阳极的阳极氧化膜形成和稳定需要一个过程.在这个过程中,电化学行为和氧化膜物相呈现明显的变化.随着恒电流极化时间的延长,阳极峰(Pb→PbSO4)的强度在前两天的电解中显著升高,其后保持在稳定状态(0.25mA/cm2),同时向正方逐渐移动.然而阳极峰(PbSO4→β-PbO2,PbO→α-PbO2)却显著地向负方向移动.阴极峰(β-PbO2和α-PbO2→PbSO4)和(PbO和PbSO4→Pb)呈现一个逐渐增加的趋势,同时逐渐的向负方向移动.而且合金阳极氧化膜的腐蚀物相主要为PbSO4、α-PbO2、β-PbO2、PbS2O3和Pb.随着电解时间的延长,PbSO4峰逐渐变弱,α-PbO2峰逐渐增强.PbSO4择优取向为(021)、(121)和(212)晶面.α-PbO2的择优取向为(111)晶面.

关 键 词:Pb→0  3%Ag-0  06%Ca合金阳极  循环伏安技术  锌电积  电化学性能

Electrochemical Behaviors of Pb - 0. 3 % Ag - 0. 06 % Ca Rolled Alloy Anode During and After Zinc Electrowinning~ CV Investigations
YANG Hai-tao,CHEN Bu-ming,GUO Zhong-cheng,XU Rui-dong. Electrochemical Behaviors of Pb - 0. 3 % Ag - 0. 06 % Ca Rolled Alloy Anode During and After Zinc Electrowinning~ CV Investigations[J]. Journal of Kunming University of Science and Technology(Natural Science Edition), 2013, 0(5): 1-5,27
Authors:YANG Hai-tao  CHEN Bu-ming  GUO Zhong-cheng  XU Rui-dong
Affiliation:1. Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China;2. Kunming Hendera Science and Technology Co. Ltd. ; Kunming 650022, China; 3. State Key Laboratory Breeding Base of Complex Nonferrous Metal Resources Cleaning Utilization, Kunming 650093, China)
Abstract:In this paper, electrochemical behaviour of Pb - 0. 3% Ag - 0. 06% Ca rolled alloy anode during the 360 hours( 15 days) galvanostatic electrolysis in acid zinc sulphate electrolyte solution is investigated with Cyclic Vohammetry (CV) techniques. The phase composition of the anodic oxide layers during the electrolysis is ob- served using X-Ray Diffraction (XRD). The results reveal that the electrochemical oxidation processes and phase formation vary obviously during the electrolysis for it is a process indicating the formation and stabilization of anodic oxide layer. With the increasing electrolysis time, the anodic peak ( Pb→PbSO4 ) mainly presents a rise trend in the first two days electrolysis. It keeps thereafter almost a constant value (0. 25 mA/cm2 ). The anodicpeak (Pb→PbSO4 ) gradually moves in the positive direction while the anodic peak (PbSO4→q3 -PbO2, PbO→a→PbO2) strongly moves in the negative direction. The cathodic peak( [3- PbO2 and a- PbO2→PbSO4 ) and (PbO and PbSO→Pb) mainly present a rise trend and gradually move in the negative direction. Besides, the corrosion phase of the anodic oxide layers mainly consists of PbSO4, a - PbO2, β - PbO2, PbS203 and Pb. With the increase of electrolysis time, the content of PbSO, presents a declining trend while the content of a - PbO2 a rising trend. The preferred growth orientation of PbSO4 anda -PbO2 is (021), (121), (212) and (111) planes respectively.
Keywords:Pb - 0. 3% Ag - 0. 06% Ca alloy anode  Cyclic Vohammetry  Zinc electrowinning  electrochemical per- foiTnance
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号