| Abstract: | The ability of paperboard to resist bending has been investigated. Paperboard is often bent in converting and packaging machines. The paperboard is bent over rolls and thus formed to certain curvatures. If the roll diameter is small the paperboard will be highly curved. This means that high tensile stresses occur on the convex side and high compression stresses on the concave side. If these stresses are too high the paperboard will be damaged by fractures and wrinkles on the surfaces. The bending stiffness of the board will also be reduced. The importance of certain parameters, such as roll diameter, angle of wrap, board thickness, board compression strength and others, have been investigated. In this study seven qualities of paperboard were investigated. It has been shown that the bending force–bending angle curve can be used to obtain information about the ability of different board qualities to be bent to certain curvatures without being damaged. © 1998 John Wiley & Sons, Ltd. |
