| 砂轮约束磨粒喷射精密光整加工材料去除机理研究 |
| |
| 引用本文： | 李长河,蔡光起,李琦,修世超,刘枫.砂轮约束磨粒喷射精密光整加工材料去除机理研究[J].中国机械工程,2005,16(23):2116-2120. |
| |
| 作者姓名： | 李长河 蔡光起 李琦 修世超 刘枫 |
| |
| 作者单位： | 1. 东北大学,沈阳,110004;内蒙古民族大学,通辽,028042
2. 东北大学,沈阳,110004 |
| |
| 基金项目： | 国家自然科学基金资助项目(50475052)，高等学校博士学科点专项科研基金资助项目(20040145001) |
| |
| 摘 要： | 基于磨粒特征尺寸与砂轮、工件间液膜厚度比值的变化,研究了砂轮约束磨粒喷射精密光整加工材料去除机理。分析了在两体加工及三体加工模式条件下,单颗磨粒运动特点以及磨粒由两体研磨加工向三体抛光加工转变的临界条件。实验证明,砂轮约束磨粒喷射光整加工中,随着加工循环的增加,工件表面微观形貌变化规律与理论分析相同,实验结果和理论分析吻合很好。
|
| 关 键 词： | 砂轮约束 游离磨粒 材料去除机理 两体研磨加工 三体抛光加工 磨粒喷射加工 |
| 文章编号： | 1004-132X（2005）23-2116-05 |
| 收稿时间： | 2005-01-05 |
| 修稿时间： | 2005-01-05 |
Investigation on Material Removal Mechanism for Abrasive Jet Precision Finishing with Grinding Wheel as Restraint |
| |
| Li Changhe,Cai Guangqi,Li Qi,Xiu Shichao,Liu Feng.Investigation on Material Removal Mechanism for Abrasive Jet Precision Finishing with Grinding Wheel as Restraint[J].China Mechanical Engineering,2005,16(23):2116-2120. |
| |
| Authors: | Li Changhe Cai Guangqi Li Qi Xiu Shichao Liu Feng |
| |
| Affiliation: | 1. Northeastern University , Shenyang, 110004;2. Inner Mongolia University for Nationalities, Tongliao,028042 |
| |
| Abstract: | The material removal mechanism into abrasive jet precision finishing machining with grinding wheel as restraint was investigated,based on the size ratio of characteristic particle size to film thickness between grinding wheel and workpiece.The single abrasive movement characteristics were studied under two-body lapping and three-body machining mode.The critical transition conditions from two-body lapping to three-body polishing were analyzed.Experiments were conducted for theoretical mode verification.It is found that workpiece surface SEM pictures are agreement with theoretical analyses. |
| |
| Keywords: | grinding wheel as restraint loose particle material removal mechanism two-body lapping three-body polishing abrasive jet machining |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
