| 多传感器集成技术用于制造系统监控中的研究 |
| |
| 引用本文： | 费仁元,阿不都热依木,王民,关剑,朱志坚,伯提古丽.多传感器集成技术用于制造系统监控中的研究[J].北京工业大学学报,2000,26(3):5-9. |
| |
| 作者姓名： | 费仁元 阿不都热依木 王民 关剑 朱志坚 伯提古丽 |
| |
| 作者单位： | 1. 北京工业大学机械工程与应用电子技术学院，北京， 100022
2. 新疆工学院机械系，乌鲁木齐， 830008 |
| |
| 基金项目： | 新疆自然科学基金;94902; |
| |
| 摘 要： | 应用多传感器集成实施监控技术，对镗削过程进行了监控实验研究．讨论了有关实验系统设备构成、传感器选择和多传感器集成方案，并讨论了典型镗削工况、切屑断裂状态和颤振先兆识别时特征信号的选择处理和决策模型．实验结果对制造系统运行状态的监控具有普遍性．
|
| 关 键 词： | 制造系统监控 镗削 多传感器集成 |
| 修稿时间： | 1999年11月9日 |
The Experimental Research of Multi-sensor Integration Monitoring on Manufacturing System |
| |
| FEI Renyuan,Abudureyimu,Wang Min,Guan Jian,Zhu Zhijian,Botiguli.The Experimental Research of Multi-sensor Integration Monitoring on Manufacturing System[J].Journal of Beijing Polytechnic University,2000,26(3):5-9. |
| |
| Authors: | FEI Renyuan Abudureyimu Wang Min Guan Jian Zhu Zhijian Botiguli |
| |
| Abstract: | Monitor system is one of the key technology on flexible manufacturing process. Multi-sensor group received information, which reflects system variation from parallel channels. The work in this paper focused on boring operation. The setup for experimental research, selection of sensors and sensor group combinations were discussed here. And also feature signal determination and process as well as the decision-making methods applied on typical boring status classification, chip form identification and chatter development were discussed in the paper. |
| |
| Keywords: | manufacturing system monitoring boring operation multi-sensor integration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
