| 斜次梁箍筋布置方式研究 |
| |
| 引用本文： | 杨维国,刘武华,陈丹,赵雅.斜次梁箍筋布置方式研究[J].低温建筑技术,2010,32(10):44-46. |
| |
| 作者姓名： | 杨维国 刘武华 陈丹 赵雅 |
| |
| 作者单位： | 北京交通大学土木建筑工程学院,北京100044 |
| |
| 摘 要： | 通过有限元数值模拟,规范公式计算两种方法分别研究主次梁斜交时(次梁为斜梁)次梁箍筋布置方式对其抗剪承载力的影响,并将两者结果进行对比分析,结果表明:有限元软件可以较好地模拟钢筋混凝土梁的破坏过程,次梁箍筋采用文中两种方式布置对其抗剪承载力影响不大,均可根据钢筋混凝土结构设计规范公式计算其抗剪承载力,其结果偏于安全。
|
| 关 键 词： | 主次梁 斜交 钢筋混凝土梁 箍筋布置方式 |
RESEARCH ON STIRRUP LAYOUT OF SKEW AND SECONDARY BEAM |
| |
| YANG Wei-guo,LIU Wu-hua,CHEN Dan,ZHAO Ya.RESEARCH ON STIRRUP LAYOUT OF SKEW AND SECONDARY BEAM[J].Low Temperature Architecture Technology,2010,32(10):44-46. |
| |
| Authors: | YANG Wei-guo LIU Wu-hua CHEN Dan ZHAO Ya |
| |
| Affiliation: | (School of Civil Engineering ＆ Architecture,Beijing Jiaotong University,Beijing 100044,China) |
| |
| Abstract: | The effects of stirrup layout on RCbeam shear strength were studied through FEM analysis and standardized formula.The results of comparative analysis show that the finite element software can simulate the destruction process of RC-beam well.And the stirrup layout has little effect on RC beam shear strength which can be calculated by reinforced concrete specification. |
| |
| Keywords: | beam and girder skew reinforced concrete beam stirrup layout |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
