首页 | 本学科首页   官方微博 | 高级检索  
     

基于Matlab/Simulink与单片机的动态温度监控系统的设计
引用本文:唐伟杰,吴明友,曹少泳.基于Matlab/Simulink与单片机的动态温度监控系统的设计[J].煤矿机械,2012,33(3):247-248.
作者姓名:唐伟杰  吴明友  曹少泳
作者单位:北京理工大学珠海学院机械与车辆学院,广东珠海,519085
摘    要:Matlab有着强大的数值处理能力,已应用于工程计算、控制系统设计、数字信号处理等诸多领域之中。工业控制中,常常需要对温度进行监控,以AT89S52单片机作为控制器,在Simulink中建立温度监控模型,由DS18B20检测到的温度数据通过串行通信,发送至上位机实时显示,当温度超出设定警戒值时,由上位机发出指令信号给AT89S52单片机,控制警报动作。实验利用Simulink平台下Instrument Control Toolbox,控制可行且方便。

关 键 词:Simulink  单片机  串行通信  温度监控

Design of Dynamic Temperature Monitoring System Based on Matlab/Simulink and Single-chip Microcomputer
TANG Wei-jie , WU Ming-you , CAO Shao-yong.Design of Dynamic Temperature Monitoring System Based on Matlab/Simulink and Single-chip Microcomputer[J].Coal Mine Machinery,2012,33(3):247-248.
Authors:TANG Wei-jie  WU Ming-you  CAO Shao-yong
Affiliation:(School of Mechanical Engineering and Vehicle,Zhuhai College of Beijing Institute of Technology,Zhuhai 519085,China)
Abstract:Matlab/Simulink as a powerful software to handle data,has already been used in various fields such as engineering calculation,control system design,digital signal processing.Pepole need to monitor temperature in industrial control usually.This paper use AT89S52 as the core of the controller,build the modle of temperature monitor system in simulink platform.The real-time displaying of temperature data which detected by DS18B20 was sended to simulink through serial communication.The instructions which control the alarm was sended to AT89S52 by simulink when the temperature exceeded the alert value.The experiment use Instrument Control Toolbox under simulink platform.The control is feasible and convenient in this way.
Keywords:Simulink  single-chip microcomputer  serial communication  temperature monitor
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号