Radiation-induced graft copolymerization of butadiene to polyethylene and polypropylene

Polyethylene and polypropylene films were irradiated by γ-irradiation from a Co⁶⁰ source in butadiene gas flow and in liquid butaidne. Irradiating in the butadiene gas flow is particularly convenient because the gas state monomer is available directly and little homopolymer is produced. In this case, there is a retardative effect on the grafting near the surface of the film and the grafting rate shows the maximum values at 50–60°C. for high-density PE (PEH) and PP. Irradiating in the liquid butadiene decreases the retardative effect near the surface. The effect of dose rate I on the grafting rate Rp is represented by R_p ∞ I^1/4 in this case. The grafting rate is always higher in PEH than in low-density PE (PEL). Results of x-ray diffractometry and electron microscopy indicate that the grafting reaction occurs predominantly near the surface of the crystallite (lamella) of PE and the grafting rate is not affected by the overall crystallinity of the trunk polymer but by the configurational structure, such as the degree of branching or side-chain length.