|
|||||
|
|
| 轧后控冷终冷温度对高强度管线钢屈强比的影响 | |
| 引用本文： | 闫立超,余伟,唐荻,黄秋菊,谢勇. 轧后控冷终冷温度对高强度管线钢屈强比的影响[J]. 上海金属, 2007, 29(3): 37-40 |
| 作者姓名： | 闫立超 余伟 唐荻 黄秋菊 谢勇 |
| 作者单位： | 北京科技大学国家高效轧制工程中心,北京,100083;鞍山钢铁集团新轧钢有限公司 |
| 摘 要： | 在一定的轧制制度和轧后控冷速度下，通过控制终冷温度得到不同微观组织的管线钢，从中研究了显微组织对管线钢屈强比的影响，结果表明，在较低终冷温度下得到的板条状贝氏体型管线钢比较高终冷温度下获得的针状铁素体型管线钢具有更低的屈强比，而板条贝氏体型管线钢中细小弥散的析出对降低屈强比也是有利的。 |
| 关 键 词： | 高强度管线钢 控轧控冷 终冷温度 显微组织 屈强比 |
| 修稿时间： | 2006-11-28 |
EFFECTS OF FINISH ROLLING TEMPERATURE ON RATIO OF YIELD TO STRENGTH IN HIGH STRENGTH PIPELINE STEEL |
|
| Yan Lichao,Yu Wei,Tang Di,Huang Qiuju,Xie Yong. EFFECTS OF FINISH ROLLING TEMPERATURE ON RATIO OF YIELD TO STRENGTH IN HIGH STRENGTH PIPELINE STEEL[J]. Shanghai Metals, 2007, 29(3): 37-40 | |
| Authors: | Yan Lichao Yu Wei Tang Di Huang Qiuju Xie Yong |
| Affiliation: | 1. National Engineering Research Center for Advance Rolling Technology, USTB; 2. Xin Zhagang Company of Anshan Iron and Steel Group Corporation |
| Abstract: | The microstructure of the pipeline steel could be controlled by controlling the finish rolling temperature. The effects of microstructure on the ratio of yield strength pipeline steel were studied. The results showed that the high strength to strength in the pipeline steel with lath bainite obtained under a lower finishing cooling temperature had lower yield to strength ratio than that with acicular ferrite under a higher temperature. The small dispersed precipitates in pipeline steel with lath bainite were beneficial to reduce the yield to strength ratio. |
| Keywords: | High Strength Pipeline Steel Controlled Rolling and Cooling Finishing Cooling Temperature Microstructure Yield to Strength Ratio |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |