| 武钢三炼钢厂工序过程磷的控制 |
| |
| 引用本文： | 曹同友,刘万善. 武钢三炼钢厂工序过程磷的控制[J]. 钢铁研究, 2002, 30(1): 5-8 |
| |
| 作者姓名： | 曹同友 刘万善 |
| |
| 作者单位： | 武汉钢铁集团公司;武汉钢铁集团公司 |
| |
| 摘 要： | 通过优化转炉吹炼模式、提高原材料质量和严细操作以降低下渣量,武钢第三炼钢厂的钢水含磷量近年显著降低。钢水的平均含磷量由1998年的0．021％降至目前的0．015％,低碳铝镇静钢的含磷量从0．018％降至0．010％,最低含磷量达到0．003％。
|
| 关 键 词： | 磷的控制 工序优化 转炉 |
| 修稿时间： | 2001-09-13 |
PHOSPHORUS CONTROL IN STEELMAKING PROCESSES AT No.3 STEELMAKING PLANT OF WISCO |
| |
| Cao Tongyou Liu Wangshan. PHOSPHORUS CONTROL IN STEELMAKING PROCESSES AT No.3 STEELMAKING PLANT OF WISCO[J]. Research on Iron and Steel, 2002, 30(1): 5-8 |
| |
| Authors: | Cao Tongyou Liu Wangshan |
| |
| Affiliation: | Wuhan Iron & Steel Corp. |
| |
| Abstract: | By means of optimizing LD blowing pattern, using quality materials and conducting strict operation to reduce the ladle slag, the phosphorus content of steel produced at the No.3 Steelmaking Plant is obviously reduced in recent years. The average phosphorus content of steel was lowered from 0.021??% in 1998 to 0.015?%. For low carbon Al-killed steel, its average phosphorus content was decreased from 0.018?% to 0.010?% and the minimum phosphorus content reduced to 0.003?%. |
| |
| Keywords: | phosphorus control process optimization LD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
