| Pilger冷轧机主传动系统虚拟样机动力学特性研究 |
| |
| 引用本文： | 崔福龙,臧勇,张国平,宋江腾.Pilger冷轧机主传动系统虚拟样机动力学特性研究[J].机械设计与制造,2008(1):36-38. |
| |
| 作者姓名： | 崔福龙 臧勇 张国平 宋江腾 |
| |
| 作者单位： | 1. 北京科技大学,机械工程学院,北京,100083
2. 北京金冶伟业重工科技有限公司,北京,100062 |
| |
| 摘 要： | 结合多体动力学仿真及分析的理论,阐述了基于动力学虚拟样机技术的Pilger冷轧管机主传动系统的仿真研究方法.以ADAMS为平台,结合Pro/E中的三维实体模型,建立了某冷轧管机主传动系统动力学虚拟样机,并进行了仿真计算和结果分析.获得了考虑轧制力分布的该主传动系统的动力学特性,为Pilger冷轧管机的设计提供了参考.
|
| 关 键 词： | 主传动系统 动力学 虚拟样机 轧机主传动 系统虚拟 机动 力学特性 研究方法 mill cold driving system virtual prototyping properties 设计 轧制力分布 结果分析 仿真计算 虚拟样机技术 系统动力学 三维实体模型 平台 ADAMS 传动系统 |
| 文章编号： | 1001-3997（2008）01-0036-03 |
| 收稿时间： | 2007-04-10 |
| 修稿时间： | 2007年4月10日 |
Dynamic properties of virtual prototyping in the main driving system of cold pilger mill |
| |
| CUI Fu-long,ZANG Yong,ZHANG Guo-ping,SONG Jiang-teng.Dynamic properties of virtual prototyping in the main driving system of cold pilger mill[J].Machinery Design & Manufacture,2008(1):36-38. |
| |
| Authors: | CUI Fu-long ZANG Yong ZHANG Guo-ping SONG Jiang-teng |
| |
| Abstract: | Based on the theory of the simulation and analysis of muti-body dynamics virtual prototyping technology the simulation method of the main driving system of cold Pilger mill is discussed. Thedynamic virtual prototyping model of the main driving system of cold Pilger mill is established based on ADAMS and Pro/E, the simulation is carried out and the results are analyzed. The dynamic properties of the main driving system are resolved based on the different types of rolling force distribution, and references are provided for the design of cold Pilger mills. |
| |
| Keywords: | Main driving system Dynamics Virtual prototyping |
| 本文献已被 维普 万方数据 等数据库收录！ |
