| 对称圆弧加直线修正型线涡旋压缩机脱啮角与排气角研究 |
| |
| 引用本文： | 吴昊,刘向农,王铁军,刘正士.对称圆弧加直线修正型线涡旋压缩机脱啮角与排气角研究[J].制冷学报,2011,32(6):20-24. |
| |
| 作者姓名： | 吴昊 刘向农 王铁军 刘正士 |
| |
| 作者单位： | 合肥工业大学机械与汽车工程学院 合肥230009 |
| |
| 摘 要： | 在采用对称圆弧加直线修正型线涡旋压缩机设计计算中,形成中心压缩腔时的转角与压缩机排气时主轴的转角完全不同.针对这两种情形下的主轴转角,由于没有完整而清晰的阐述,导致计算涡旋压缩机各压缩腔容积时容易产生较大误差.对此,通过研究采用对称圆弧加直线修正涡旋压缩机涡盘始端型线的几何特性,定义了脱啮角与实际排气角,阐明了二者之间相互区别,详细推导了脱啮角计算公式并分析了影响脱啮角的因素,且根据涡盘始端壁厚增加造成修正后中心压缩腔容积减少的本质特点,提供了修正后涡盘始端壁厚增加容积和实际排气角的计算方法.通过运算实例验证了脱啮角与实际排气角相差很大的结论,指出实际排气角将影响排气孔的设计.
|
| 关 键 词： | 热工学 涡旋压缩机 圆弧加直线修正 脱啮角 实际排气角 |
Study on Mesh-apart Angle and Discharge Angle of Scroll Compressor with Symmetrical Circular Arc plus Line-Shaped Top Profile |
| |
| Wu Hao,Liu Xiangnong,Wang Tiejun and Liu Zhengshi.Study on Mesh-apart Angle and Discharge Angle of Scroll Compressor with Symmetrical Circular Arc plus Line-Shaped Top Profile[J].Journal of Refrigeration,2011,32(6):20-24. |
| |
| Authors: | Wu Hao Liu Xiangnong Wang Tiejun and Liu Zhengshi |
| |
| Affiliation: | Wu Hao Liu Xiangnong Wang Tiejun Liu Zhengshi(School of Mechanical and Automotive Engineering,Hefei University of Technology,Hefei,230009,China) |
| |
| Abstract: | In design and calculation of scroll compressor with symmetrical circular arc plus line-shaped top profile,rotating angle of crankshaft at the very moment when centre compression chamber is formed is totally different from that at the beginning of the discharge.There is no complete and distinct elaboration about the two kinds of angles yet,so it may cause large errors in calculating different compression chambers.Through in-depth research on the geometric property of scroll compressor with symmetrical circul... |
| |
| Keywords: | Pyrology Scroll compressor Symmetrical circular arc plus line-shaped Mesh-apart angle Discharge angle |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《制冷学报》浏览原始摘要信息 |
|
点击此处可从《制冷学报》下载全文 |
|
