| 纸浆泵泵轴强度的有限元分析 |
| |
| 引用本文： | 李红,王艳艳,夏长高,张万义.纸浆泵泵轴强度的有限元分析[J].中华纸业,2006,27(7):66-68. |
| |
| 作者姓名： | 李红 王艳艳 夏长高 张万义 |
| |
| 作者单位： | 1. 江苏大学流体中心,江苏大学汽车学院,江苏,镇江,212013
2. 保定中通泵业有限公司,河北,保定,071000 |
| |
| 摘 要： | 应用大型通用有限元分析软件Ansys，对纸浆泵泵轴进行了强度分析。分别取零流量工况和设计点工况作为泵轴计算工况，对泵轴载荷进行计算，通过实体建模、有限元求解，最终描述出泵轴在不同工况下不同截面上的应力分布情况。与传统算法相比，该方法可准确了解零件应力和变形的大小和位置，进行精确的轴强度计算。
|
| 关 键 词： | 泵轴强度 有限元分析 Ansys软件 |
| 文章编号： | 1007-9211(2006)07-0066-03 |
| 修稿时间： | 2005年12月11 |
A finite element analysis of the pulp pump shaft intensity |
| |
| LI Hong,WANG Yan-yan,XIA Chang-gao,ZHANG Wan-yi.A finite element analysis of the pulp pump shaft intensity[J].China Pulp & Paper Industry,2006,27(7):66-68. |
| |
| Authors: | LI Hong WANG Yan-yan XIA Chang-gao ZHANG Wan-yi |
| |
| Abstract: | An intensity analysis was carried out to the pulp pump shaft with Ansys,a large-sized general-purpose finite element analysis software.No-discharge operation mode and design point operation mode were chosen as the calculation operation mode to calculate the pump shaft load.By solid modeling,finite element solving,the stress distribution under different operation modes and on different sections is got at last.Compared with the traditional method,the value and the location of the stress and distortion can be accurately calculated with this method. |
| |
| Keywords: | pump shaft intensity finite element analysis Ansys software |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
