| 锯切弧区内金刚石颗粒承受载荷的研究 |
| |
| 引用本文： | 黄辉,徐西鹏.锯切弧区内金刚石颗粒承受载荷的研究[J].金刚石与磨料磨具工程,1999(4):7-10. |
| |
| 作者姓名： | 黄辉 徐西鹏 |
| |
| 作者单位： | 华侨大学!362011 |
| |
| 摘 要： | 本文对锯切弧区内的金刚石颗粒上所承受的载荷进行了研究，分析了在不同锯切用量，锯切不同石材时金刚石颗粒上所承受的载荷，并根据对载荷的研究，提出了一种根据石材选用金刚石的新依据。
|
| 关 键 词： | 金刚石 花岗石 平均载荷 锯切 |
A Study on the Load on Diamond Grit in the Cutting Arc Zone when Sawing Granite |
| |
| Huang Hui et al.A Study on the Load on Diamond Grit in the Cutting Arc Zone when Sawing Granite[J].Diamond & Abrasives Engineering,1999(4):7-10. |
| |
| Authors: | Huang Hui |
| |
| Abstract: | In this paper,the load on the diamond grit in the contact zone when sawing granite and the variability of load on diamond grit under different parameters when sawing different granite are researched.A new way of selecting diamond grit for different sorts of granites is advanced. |
| |
| Keywords: | diamond granite average load sawing |
| 本文献已被 CNKI 维普 等数据库收录！ |
