Effect of nylon 6 on fracture behavior and morphology of tough blends of poly(2, 6‐dimethyl‐1,4‐phenylene oxide) and maleated styrene‐ethylene‐butadiene‐styrene block copolymer

Ternary blends of poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO), nylon 6, and styrene‐ethylene‐butadiene‐styrene block copolymer grafted with maleic anhydride (SEBS‐g‐MA) were prepared via a melt extrusion, and the fracture behavior, morphology, mechanical properties, and rheology were studied. The compatibilization of the blended components was confirmed by differential scanning calorimetry (DSC) analysis. Mechanical properties evaluation demonstrated that incorporation of nylon 6 resulted in an improvement of the tensile strength, but reduction of both the notched Izod impact strength and elongation at break. Transmission electron microscopy (TEM) observation revealed that the network structure of SEBS‐g‐MA domain was gradually destroyed by incorporating the nylon 6. A conversion of SEBS‐g‐MA domain from the network to the irregular dispersed phase took place when the nylon 6 content reached 20 wt %, which resulted in a reduction of the impact strength. Fracture morphology implied that increase of the tensile strength was caused by the plastic deformation of matrix. Rheology investigation indicated that the melt viscosities could be reduced significantly with increasing the content of nylon 6; thus, the processability was improved. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99:3336–3343, 2006