| 支座热压模设计及改进 |
| |
| 引用本文： | 钟翔山.支座热压模设计及改进[J].模具技术,2007(5):20-22,26. |
| |
| 作者姓名： | 钟翔山 |
| |
| 作者单位： | 江西新余市长林集团长林机器公司,技术部,江西,新余,338029 |
| |
| 摘 要： | 针对支座热压加工过程中出现的质量问题,对工艺进行了分析,找出了原因,并改进了工艺,设计了一套弯曲成形复合模,在同一工作行程中加工出零件,满足了产品要求,提高了生产效率.
|
| 关 键 词： | 支座 热压模 弯曲成形 复合模 支座 压模 设计 改进 support improvement 生产效率 产品要求 零件 加工过程 工作行程 复合模 弯曲成形 分析 工艺 质量问题 热压 |
| 文章编号： | 1001-4934（2007）05-0020-03 |
| 收稿时间： | 2007-02-14 |
| 修稿时间： | 2007-02-14 |
Design and improvement of hot-pressing die for the support |
| |
| ZHONG Xiang-shan.Design and improvement of hot-pressing die for the support[J].Die and Mould Technology,2007(5):20-22,26. |
| |
| Authors: | ZHONG Xiang-shan |
| |
| Abstract: | With respect to quality problem during support manufacturing, forming process was analyzed. The reason was found and the process was improved. A compound bending die was designed to manufacture the part in the same procedure. The die satisfied the quality requirement and improved production efficiency. |
| |
| Keywords: | support hot-pressing die bending compound die |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
