首页 | 本学科首页   官方微博 | 高级检索  
     

一种多模式复合调制的L-R型LCC谐振变换器
引用本文:袁义生,易尘宇,赖立.一种多模式复合调制的L-R型LCC谐振变换器[J].电力自动化设备,2022,42(2):141-147.
作者姓名:袁义生  易尘宇  赖立
作者单位:华东交通大学 电气与自动化工程学院,江西 南昌 330013
基金项目:国家自然科学基金资助项目(52067007)
摘    要:提出一种多模式复合调制的线性-谐振(L-R)型LCC谐振变换器.该变换器根据Boost调制的思路,结合传统LCC谐振变换器,实现了电感电流线性-谐振型变化的转换,具有全负载范围的软开关特性.在复合调制方式下,变换器能实现3种工作模式的互相转换以适应宽输出电压和负载变化范围的应用场合,解决了传统LCC谐振变换器在轻载条件...

关 键 词:变换器  LCC谐振  多模式复合调制  宽范围输出  恒流-恒压充电

Multi-mode compound modulation L-R LCC resonant converter
YUAN Yisheng,YI Chenyu,LAI Li.Multi-mode compound modulation L-R LCC resonant converter[J].Electric Power Automation Equipment,2022,42(2):141-147.
Authors:YUAN Yisheng  YI Chenyu  LAI Li
Affiliation:School of Electrical and Automation Engineering, East China Jiaotong University, Nanchang 330013, China
Abstract:A multi-mode compound modulation L-R(Linear-Resonance) LCC resonant converter is proposed. The proposed converter combines traditional LCC resonant converter with Boost modulation to realize the conversion of inductive current between linear and resonant type, and achieves the soft switching characteristic in full load range. In composite modulation mode, the converter can be converted among three opera-ting modes to adapt to the application with wide output voltage and load range, which solves the problem that it is difficult to realize soft switching in traditional LCC resonant converter under light load. Compared with the existing Boost modulation resonant converter, the proposed converter uses a rear-mounted parallel resonant capacitor to construct the LCC resonant structure and cooperate with the back-end LC filtering structure, which solves the problem of large output ripple caused by discontinuous resonant current under Boost modulation mode. The working principle of each mode is described in detail, the time-domain expressions of each variable are derived, and the voltage gain expression with more accuracy is obtained. Finally, based on the CC-CV(Constant Current and Constant Voltage) charging mode, an experimental prototype with input voltage of 110 V, output voltage of 80~150 V, output current of 0~3.33 A and maximum output power of 500 W is designed. The design method of each parameter and mode conversion is given, and the experimental results prove the correctness of theoretical analysis.
Keywords:electric converters  LCC resonance  multi-mode compound modulation  wide-range output  CC-CV charging
本文献已被 万方数据 等数据库收录!
点击此处可从《电力自动化设备》浏览原始摘要信息
点击此处可从《电力自动化设备》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号