淄博热电两台机组同时误跳的原因分析与对策 |
| |
引用本文: | 贾善杰,苏文博,潘向华.淄博热电两台机组同时误跳的原因分析与对策[J].山东电力技术,2006(6):39-41. |
| |
作者姓名: | 贾善杰 苏文博 潘向华 |
| |
作者单位: | 山东电力研究院,山东电力研究院,山东电力超高压分公司 山东 济南 250002,山东 济南 250002,山东 济南 250021 |
| |
摘 要: | 淄博热电公司220kV南付线211开关及桥联200开关在一次系统没有故障、机组没有出现异常的情况下跳闸,引起#3、4机组与系统解列并全停。当时相关的保护无任何动作信号、监控设备无任何操作信号,开关的跳闸属于误动行为。
|
关 键 词: | 机组误跳 原因分析与对策 |
Causes and Countermeasures of Two Generators Maloperation in Zibo Power Plant |
| |
Abstract: | The breaker211 of 220kV Nantu transmission line and breaker200 tripped with the primary system and generator unit having no fault or unconventionality,which resulted in the #3 and #4 generator shutting down and splitting from system. There were no action signals of the relating relay protection equipment.And the supervisory device had no operation signals. In conclusion,it is maloperation. |
| |
Keywords: | generator maloperation causes and measures |
本文献已被 CNKI 维普 等数据库收录! |