| 高强钢激光电弧复合焊接温度场的数值模拟与试验研究 |
| |
| 引用本文： | 周勇,张成文,张国军,付甲,牛楠,刁路青,王洪铎. 高强钢激光电弧复合焊接温度场的数值模拟与试验研究[J]. 精密成形工程, 2022, 14(1): 153-158 |
| |
| 作者姓名： | 周勇 张成文 张国军 付甲 牛楠 刁路青 王洪铎 |
| |
| 作者单位： | 西安石油大学 材料科学与工程学院，西安 710065;辽河油田建设有限公司，辽宁 盘锦 124120 |
| |
| 基金项目： | 国家自然科学基金(51905427);西安石油大学“材料科学与工程”省级优势学科资助项目(YS37020203);西安石油大学研究生创新与实践能力培养计划资助项目(YCS20212113) |
| |
| 摘 要： | 目的 对厚度为12 mm的HG785D高强钢进行复合焊接,获取最佳焊接工艺参数,建立适用于激光-MIG(Metal Inert Gas Welding)复合焊接的热源模型.方法 采用激光-MIG复合焊接方法进行焊接试验,建立适用于HG785D高强钢激光-MIG复合焊接的"高斯锥形体+均匀锥形体+高斯柱形体"复合热源模型...
|
| 关 键 词： | 激光-MIG复合焊接 高强钢 数值模拟 温度场 |
| 收稿时间： | 2021-06-07 |
Numerical Simulation and Experimental Study of Temperature Field of Hybrid Laser Arc Welding Joint of High Strength Steel |
| |
| ZHOU Yong,ZHANG Cheng-wen,ZHANG Guo-jun,FU Ji,NIU Nan,DIAO Lu-qing,WANG Hong-duo. Numerical Simulation and Experimental Study of Temperature Field of Hybrid Laser Arc Welding Joint of High Strength Steel[J]. Journal of Netshape Forming Engineering, 2022, 14(1): 153-158 |
| |
| Authors: | ZHOU Yong ZHANG Cheng-wen ZHANG Guo-jun FU Ji NIU Nan DIAO Lu-qing WANG Hong-duo |
| |
| Affiliation: | School of Materials Science and Engineering, Xi''an Shiyou University, Xi''an 710065, China;Liaohe Oilfield Construction Company Limited, Panjin 124120, China |
| |
| Abstract: | The work aims to weld HG785D high strength steel with a thickness of 12 mm by hybrid welding and obtain the optimal welding process parameters, so as to establish the heat source model suitable for laser-MIG (Metal Inert Gas Welding) hybrid welding. The laser-MIG hybrid welding method was used for welding experiment, and a Gaussian cone + uniform cone + Gaussian cylindrical hybrid heat source model suitable for laser-MIG hybrid welding of HG785D high strength steel was established to describe the energy distribution of the hybrid heat source. The temperature field of laser-MIG hybrid welding of HG785D high strength steel was simulated by ANSYS finite element analysis software. Under the optimal process parameters, the weld was well formed without any cracks, pores and incomplete penetration. The macroscopic morphology of the hybrid welded joint and the temperature cycle curve of the characteristic point obtained by experiment and simulation were consistent. The optimal welding process parameters suitable for 12 mm thick HG785D high strength steel are obtained, and the hybrid heat source model is suitable for the temperature field simulation of laser-MIG hybrid welding of high strength steel. |
| |
| Keywords: | laser-MIG hybrid welding high strength steel numerical simulation temperature field |
|
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载免费的PDF全文 |
|
