|
|||||
|
|
| 基于LTCC技术的X波段接收机前端设计与制作 | |
| 引用本文： | 钱可伟,曾志毅. 基于LTCC技术的X波段接收机前端设计与制作[J]. 电子元件与材料, 2008, 27(6): 6-8 |
| 作者姓名： | 钱可伟 曾志毅 |
| 作者单位： | 电子科技大学,电子科学技术研究院,四川,成都,610054 |
| 摘 要： | 采用低温共烧陶瓷(LTCC)技术和三维立体组装技术设计制作了一种适用于X波段接收机的前端模块,并进行了测试。结果表明:设计制作出的接收机前端主要技术指标为:增益大于20 dB、噪声系数小于等于7.8 dB和1 dB压缩点功率大于等于10 dBm,层数为10层。在电气性能相当的情况下,其体积和质量相对于传统PCB组件有较大缩减。 |
| 关 键 词： | 电子技术 低温共烧陶瓷 X波段接收机前端 |
| 文章编号： | 1001-2028(2008)06-0006-03 |
| 修稿时间： | 2008-04-17 |
Design and fabrication of X band receiver front-end based on LTCC technology |
|
| QIAN Ke-wei,ZENG Zhi-yi. Design and fabrication of X band receiver front-end based on LTCC technology[J]. Electronic Components & Materials, 2008, 27(6): 6-8 | |
| Authors: | QIAN Ke-wei ZENG Zhi-yi |
| Affiliation: | QIAN Ke-wei,ZENG Zhi-yi(RIEST,University of Electronic Science , Technology of China,Chengdu 610054,China) |
| Abstract: | Using low temperature co-fired ceramics(LTCC) technology and three dimensional(3D) cubic packaging technology,a receiver front-end in X-band was designed and fabricated,then investigated.Results show that the receiver front-end shows the gain above 20 dB、noise figure below 7.8 dB and power at 1 dB compression point above 10 dBm.It has ten layers,and has great advantages in volume and weight compared with traditional PCB module when their electric performance is equal. |
| Keywords: | electron technology LTCC X band receiver front-end |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |