| HIP diffusion bonding of P/M titanium alloy Ti-6Al-4V and stainless steel 1Cr18Ni9Ti |
| |
| 作者姓名： | 郎泽保 王亮 张绪虎 |
| |
| 作者单位： | Aerospace Research Institute of Materials and Processing Technology, Beijing 100076, China |
| |
| 基金项目： | Projects （51312010310） supported by the General Armament Department of Chinese PLA |
| |
| 摘 要： |
|
| 关 键 词： | 钛 铝 合金 连接强度 不锈钢 |
| 收稿时间： | 2007-07-15 |
| 修稿时间： | 2007-09-10 |
HIP diffusion bonding of P/M titanium alloy Ti-6Al-4V and stainless steel 1Cr18Ni9Ti |
| |
| LANG Ze-bao, WANG Liang, ZHANG Xu-hu.HIP diffusion bonding of P/M titanium alloy Ti-6Al-4V and stainless steel 1Cr18Ni9Ti[J].Transactions of Nonferrous Metals Society of China,2007,17(A01):79-83. |
| |
| Authors: | LANG Ze-bao WANG Liang ZHANG Xu-hu |
| |
| Abstract: | The HIP diffusion bonding of P/M titanium alloy Ti-6A1-4V and stainless steel 1Cr18Ni9Ti using pure Ni as intermediate layer was studied. Bonding joint with complex bonding interface was obtained by HIPing pre-alloyed Ti-6Al-4V powders and stainless steel 1Crl 8Ni9Ti in a vacuum canning. The joint strengths were examined and the characteristics of bonding joint were observed. The result shows that the maximized strength of HIP diffusion bonding between P/M titanium alloy Ti-6Al-4V and stainless steel 1Cr18Ni9Ti can be up to 388 MPa and the microstructure of bonding joint is acceptable. |
| |
| Keywords: | Ti-6Al-4V 1Cr18Ni9Ti HIP diffusion bonding stainless steel titanium alloy powder metallurgy |
| 本文献已被 维普 等数据库收录！ |
