| Abstract: | In many applications, topography represents the main external features of a surface. This paper describes the topography of the flank wear surface and also presents the relationship between the maximum flank wear and the topography parameters (roughness parameters) of the flank wear surface during the turning operation. A modern CNC lathe machine (Okuma LH35-N) was used for the machine turning operation. Three-dimensional surface roughness parameters of the flank wear surface were measured by a surface texture instrument (from Talysurf series) using surface topography software (Talymap). Based on the resulting experimental data, it is found that as the flank wear increases, the roughness parameters (sRa, sRq, and sRt) on the flank surface increase significantly. The greater the roughness value of the flank wear surface, the higher the friction of the tool on the workpiece and the greater the heat generation that will occur, thus ultimately causing tool failure. On the other hand, positive skewness (sRsk) indicates the presence of a small number of spikes on the flank surface of the cutting tool, which could quickly wear off during the machining process. |
