首页 | 本学科首页   官方微博 | 高级检索  
     

基于工控机的航空侦察平台控制器的设计与实现
引用本文:宋悦铭,沈宏海,刘晶红,李仕.基于工控机的航空侦察平台控制器的设计与实现[J].计算机测量与控制,2010,18(2).
作者姓名:宋悦铭  沈宏海  刘晶红  李仕
作者单位:1. 中国科学院长春光学精密机械与物理研究所,吉林,长春,130033
2. 中国科学院长春光学精密机械与物理研究所,吉林,长春,130033;中国科学院研究生院,北京100039
基金项目:国防科技预研基金资助(1040603)
摘    要:针对航空侦察平台的现有控制系统的不足,提出一种基于工控机的控制器设计方案;该方案以工程应用的嵌入式计算机为基础,通过图像采集卡的两独立通道对侦察平台输出的两路视频进行图像采集,通过多串口卡实现计算机与侦察平台、GPS定位仪、无线传输等设备的串口联机通讯,由VC语言完成整个软件控制平台的程序设计;该方案的优点是可以将平台以外的设备的功能通过计算机实现,在有效减少机载设备的体积和重量的同时增加了许多拓展功能;经飞行实验证明该方案是可行的。

关 键 词:机载设备  侦察平台  图像处理  串口通讯  

Aerial-Reconnaissance-Platform Control System's Design and Realization in Industrial Embedded Computer
Song Yueming,Shen Honghai,Liu Jinghong,LI Shi.Aerial-Reconnaissance-Platform Control System's Design and Realization in Industrial Embedded Computer[J].Computer Measurement & Control,2010,18(2).
Authors:Song Yueming  Shen Honghai  Liu Jinghong  LI Shi
Affiliation:1.Changchun Institute of Optics/a>;Fine Mechanics and Physics/a>;Chinese Academy of Sciences/a>;Changchun 130033/a>;China/a>;2.Graduate School of the Chinese Academy of Sciences/a>;Beijing 100039/a>;China
Abstract:A new control system design based on industrial embedded computer,was presented to complement the short of the existing control system of airborne reconnaissance platform.In the new design,the industrial embedded computer used the two independent paths of a image grabbing card to capture frames from two video sources on the airborne reconnaissance platform simultaneously,and used multiport card to connect the serial communication equipments such as airborne reconnaissance platform,GPS,wireless transmission ...
Keywords:airborne equipment  reconnaissance platform  image processing  serial communication  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号