EFFECT OF FLUIDIZING PARTICLE ON DRYING CHARACTERISTICS OF POROUS MATERIAL IN FLUIDIZED BED |
| |
Authors: | Yuji Tatemoto Yoshiyuki Bando Keiji Yasuda Yoshitaka Senda Masaaki Nakamura |
| |
Affiliation: |
a Department of Materials Science and Chemical Engineering, Shizuoka University, Hamamatsu City, Japan
b Department of Chemical Engineering, Nagoya University, Nagoya, Japan |
| |
Abstract: | The drying characteristics of porous material in fluidized bed were examined theoretically and experimentally. The brick ball was used as the sample and immersed in the fluidized bed. The glass beads were used as the fluidizing particles and the particle diameters were changed. When the pore diameter of sample was relatively large, the fluidizing particles were adhered on the sample surface. In the theoretical analysis, the heat and mass transfers in adhered particle layer were considered. The fluidizing particles were adhered on the sample surface during the earlier period of drying. The sample temperature largely decreased when the mass of adhered particle decreased. The calculated results are in good agreement with experimental data. The diameter of fluidizing particle had a small effect on the drying time. The excess increments in drying gas temperature hardly contributed to shortening the drying time. |
| |
Keywords: | Fluidized bed drying Particle adhesion Temperature decrement Porous ball Pore diameter Fluidizing particle diameter Drying gas velocity Drying rate |
本文献已被 InformaWorld 等数据库收录! |