| Abstract: | Polysulfone (PSf) asymmetric hollow‐fiber membranes, which have a dense outer layer but a loose inner layer, were tentatively fabricated by coextrusion through a triple‐orifice spinneret and a dry/wet‐phase inversion process. Two simple polymer dopes were tailored, respectively, for the dense outer layer and the porous inner layer according to the principles of the phase‐inversion process. By adjusting the ratio of the inner/outer extrusion rate, the hollow‐fiber membranes with various thicknesses of outer layers were achieved. The morphology of the hollow‐fiber membranes was exhibited and the processing conditions and the water permeability of the membrane were investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 259–266, 2004 |
