| 避免半激冷合金铸铁凸轮轴早期断裂的途径 |
| |
| 引用本文： | 沈保罗,李莉,高致文. 避免半激冷合金铸铁凸轮轴早期断裂的途径[J]. 现代铸铁, 2014, 0(3): 72-74 |
| |
| 作者姓名： | 沈保罗 李莉 高致文 |
| |
| 作者单位： | [1]四川大学材料科学与工程学院,四川成都610064 [2]成都金顶凸轮轴铸造有限公司,四川郫县611732 |
| |
| 摘 要： | 采用多元线性回归的方法得到了Cr-Ni-Mo半激冷凸轮轴时归位和轴颈硬度方程,分析认为,适当提高Cr-Ni-Mo半激冷凸轮轴的w(Cr)量,适当降低w(C)和w(Si)量,以及适当增加铁液浇注前三角试片的白口深度,可以有效地提高Cr-Ni-Mo半激冷凸轮轴时归位和轴颈的硬度,从而有效地避免凸轮轴发生早期断裂失效。
|
| 关 键 词： | 半激冷合金铸铁 凸轮轴 时归位 断裂 |
Approach to Avoid Early Fracture of Semi-Chilled Alloyed Cast Iron Camshaft |
| |
| SHEN Bao-luo,LI Li,GAO Zhi-wen. Approach to Avoid Early Fracture of Semi-Chilled Alloyed Cast Iron Camshaft[J]. Modern Cast Iron, 2014, 0(3): 72-74 |
| |
| Authors: | SHEN Bao-luo LI Li GAO Zhi-wen |
| |
| Affiliation: | 1.Material Science and Engineering College, Sichuan University, Chengdu 610064, China; 2.Chengdu Jinding Camshaft Foudry Co.,Ltd.,Pixian 611732,China) |
| |
| Abstract: | The hardness equation of timing position and the hardness equation of timing shaft were obtained by using multiple linear regression equation. It was considered by analysis that it is possible by properly increasing Cr content,properly decreasing C content and Si content,and as well as properly increasing chilling width of the iron melt before pouring to effectively increase hardness of the timing position and timing shaft and thereby to avoid early fracture of the Cr-Ni-Mo alloyed semi-chilled camshaft. |
| |
| Keywords: | semi-chilled alloyed cast iron camshaft timing position fracture |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
