| 顶管机孔型设计与机架排列优化及实践 |
| |
| 引用本文： | 罗涛,李银.顶管机孔型设计与机架排列优化及实践[J].钢管,1993(4):6-11. |
| |
| 作者姓名： | 罗涛 李银 |
| |
| 作者单位： | 成都无缝钢管厂，成都无缝钢管厂 |
| |
| 摘 要： | 介绍了顶管机孔型设计和机架优化排列设计的实用程序公式。对φ133mm顶管机进行合理的孔型设计和机架优化排列,开发出φ159mm孔型。
|
| 关 键 词： | 顶管机 孔型设计 机架排列 |
PASS DESIGN & STAND ARRANGEMENT OPTIMIZATION OF PUSH BENCH PIPE MILL AND CORRESPONDING PRACTICE |
| |
| Luo Tao Li Yin.PASS DESIGN & STAND ARRANGEMENT OPTIMIZATION OF PUSH BENCH PIPE MILL AND CORRESPONDING PRACTICE[J].Steel Pipe,1993(4):6-11. |
| |
| Authors: | Luo Tao Li Yin |
| |
| Affiliation: | Chengdu Seamless Steel Tube Plant |
| |
| Abstract: | Given in this paper is an introduction to pass design and stand arrangement optimization of push beneh pipe mill, covering relevant practical programmes, details regarding the φ133mm Push Bench Mill as well as the development of the pass of φ159mm. |
| |
| Keywords: | Push bench pipe mill Pass design Stand arrangement |
| 本文献已被 CNKI 维普 等数据库收录！ |
