| 工业炸药爆轰参数理论计算 |
| |
| 引用本文： | 郑恒威,郭子如,张显丕.工业炸药爆轰参数理论计算[J].煤矿爆破,2007(4):1-4. |
| |
| 作者姓名： | 郑恒威 郭子如 张显丕 |
| |
| 作者单位： | 安徽理工大学,安徽省淮南市 232001 |
| |
| 摘 要： | 总结了关于爆轰产物状态方程的几种观点,通过计算几种工业炸药爆轰参数并与实验值作比较,其中运用多方方程*方法计算的爆速值作为炸药的理想爆速计算值DM。分析计算结果发现,乳化炸药的爆速计算值与实验值相对误差最小,得出乳化炸药的爆轰行为比较符合C-J模型,更接近于理想爆轰的结论。
|
| 关 键 词： | 工业炸药 爆轰参数 状态方程 |
Theory Calculation of Detonation Parameters for Industrial Explosive |
| |
| Abstract: | Some viewpoints on the equation of state about the detonation products are summarized and discussed,by calculating several industry explosive detonation parameter and comparing the practical tested explosive detonation parameter in which utilization Multi-equation method computation rate of detonation velocity takes the calculation value of the industrial explosive ideal detonation velocity. By analyzing the calculation value,we found that the relative error between emulsion explosive calculation value of explosion velocity and the experimental value are the smallest,obtaining the detonation behavior of emulsion explosive near to the C-J model which approaches to the ideal detonation theory more. |
| |
| Keywords: | industrial explosive detonation parameters equation of state |
| 本文献已被 维普 等数据库收录！ |
|
