| 用溶胶－凝胶法在碳纤维表面涂覆Al_2O_3 |
| |
| 引用本文： | 王玉庆,郑久红,周龙江,王作明,周本濂.用溶胶－凝胶法在碳纤维表面涂覆Al_2O_3[J].复合材料学报,1995(3). |
| |
| 作者姓名： | 王玉庆 郑久红 周龙江 王作明 周本濂 |
| |
| 作者单位： | 中国科学院金属研究所，中国科学院金属腐蚀与防护研究所 |
| |
| 基金项目： | 国家自然科学基金和中国科学院腐蚀科学开放实验室资助项目 |
| |
| 摘 要： | 本文研究用溶胶－凝胶方法在碳纤维表面涂覆Ａｌ＿２Ｏ＿３，的工艺对涂层性能、结构及对纤维强度、抗氧化性能等的影响。结果表明：所配溶胶质量好，涂覆工艺合适，可在纤维表面得到均匀、连续的Ａｌ＿２Ｏ＿３，涂层；该涂层不仅改善了纤维的抗氧化性能，而且还能保持纤维原有的强度；改善与熔铝的润湿性，为复合材料的制备提供方便。
|
| 关 键 词： | 溶胶一凝胶法、Al＿2O＿3，涂层，碳纤维，强度，抗氧化性能，润湿性 |
COATING Al_2O_3 ON CARBON FIBERS BY SOL-GEL PROCESS |
| |
| Wang Yuqing, Zheng Jiubong, Wang Zuoming, Zhou Benlian.COATING Al_2O_3 ON CARBON FIBERS BY SOL-GEL PROCESS[J].Acta Materiae Compositae Sinica,1995(3). |
| |
| Authors: | Wang Yuqing Zheng Jiubong Wang Zuoming Zhou Benlian |
| |
| Abstract: | Coating process of Al_2O_3 on carbon fibers and eHect of the coating onwettabiiity of carbon fibers by molten aluminum were investigated.Uniform coating oncarbon fibers was obtaincd by the optimized parameters. The coating improved theoxidation-resistance,the strength & the wettability of carbon fibers,and also made thefabricating process of metal matrix composites easier. |
| |
| Keywords: | sol-gel Al_2O_3 coating carbon fibers strength oxidation-resistance wettability |
| 本文献已被 CNKI 等数据库收录！ |
