| Fe-Cr-B-C堆焊合金的显微组织及耐磨性 |
| |
| 引用本文： | 龚建勋,李丹,肖逸锋,张清辉.Fe-Cr-B-C堆焊合金的显微组织及耐磨性[J].材料热处理学报,2010,31(3). |
| |
| 作者姓名： | 龚建勋 李丹 肖逸锋 张清辉 |
| |
| 作者单位： | 湘潭大学机械工程学院,湖南,湘潭,411105 |
| |
| 基金项目： | 湖南省科技攻关计划资助项目(2006GK3087);;湘潭大学科研启动基金资助项目(06QDZ05) |
| |
| 摘 要： | 采用药芯焊丝埋弧堆焊方法制备含有C0.5%～0.7%,Cr9%～12%,B0%～2.25%(质量分数)的堆焊合金。借助光学显微镜、扫描电镜、X射线衍射和微区EDS分析等手段研究其显微组织及分布形貌。结果表明,其显微组织由铁素体+奥氏体+马氏体+硼化物((Fe,Cr)2B,(Fe,Cr)23(C,B)6,(Fe,Cr)B和(Fe,Cr)3(B,C))等组成,硼化物呈条状、菊花状、块状甚至蜂窝状等形态,不同硼化物数量及其分布形态随硼含量而改变,其中最为典型是(Fe,Cr)23(C,B)6呈菊花状并聚集分布。另外,考察了硼含量对Fe-10Cr-xB-0.6C堆焊合金硬度及耐磨性的影响,耐磨粒磨损试验结果表明,高硼堆焊合金的磨损性优良,当聚集分布的硼化物数量过多,磨粒压入基体及其显微切削运动受到硼化物的有效阻碍,但部分硼化物脱落留下的空洞使其压入切削变易,这使得硼化物与基体的界面结合强度成为影响其耐磨性的一个重要甚至主导因素。
|
| 关 键 词： | 耐磨性 显微组织 硼化物 界面结合强度 堆焊 药芯焊丝 |
Microstructure and wear resistance of Fe-Cr-B-C hardfacing alloys |
| |
| GONG Jian-xun,LI Dan,XIAO Yi-feng,ZHANG Qing-hui.Microstructure and wear resistance of Fe-Cr-B-C hardfacing alloys[J].Transactions of Materials and Heat Treatment,2010,31(3). |
| |
| Authors: | GONG Jian-xun LI Dan XIAO Yi-feng ZHANG Qing-hui |
| |
| Affiliation: | School of Mechanical Engineering/a>;Xiangtan University/a>;Xiangtan 411105/a>;China |
| |
| Abstract: | Hardfacing alloys containing 0.5%-0.7%C, 9%-12%Cr, 0%-2.25%B (mass fraction) were deposited on Q235 steel by flux-cored wire submerged arc welding (SAW). Microstructure of the hardfacing alloys was investigated by means of optical microscopy (OM), scanning electron microscopy (SEM),X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). The microstructure of the alloys consists of ferrite, austenite and martensite, borides of (Fe,Cr)_2B, (Fe, Cr)_ 23 (C, B)_6, (Fe, Cr)B and (Fe, Cr)_3(B, C). The b... |
| |
| Keywords: | wear resistance microstructure boride interfacing bond strength hardfacing flux-cored wire |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
