首页 | 本学科首页   官方微博 | 高级检索  
     

微量Sc对Mg-7Gd-3Y合金组织及力学性能的影响
引用本文:刘彪,刘子利,刘细良.微量Sc对Mg-7Gd-3Y合金组织及力学性能的影响[J].特种铸造及有色合金,2009,29(7).
作者姓名:刘彪  刘子利  刘细良
作者单位:南京航空航天大学材料科学与技术学院
摘    要:利用光学显微镜、扫描电镜和XRD,分析研究了微量Sc对Mg-7Gd-3Y铸态合金组织及其室温和200℃力学性能的影响.结果表明,在合金中加入0.5%的Sc,促进了Mg24(Y,Gd)5和Mg5(Gd,Y)相的析出,降低Gd在Mg24(Y,Gd)5相中的相对含量,合金的室温和200℃时的抗拉强度分别提高了25 MPa和18 MPa;屈服强度分别提高了28 MPa和22MPa;伸长率分别提高了18.3%和37.8%.

关 键 词:Mg-7Gd-3Y合金  组织  力学性能

Effects of Minor Sc Addition on Microstructure and Mechanical Properties of Mg-7Gd-3Y Alloys
Liu Biao,Liu Zili,Li Xiliang.Effects of Minor Sc Addition on Microstructure and Mechanical Properties of Mg-7Gd-3Y Alloys[J].Special Casting & Nonferrous Alloys,2009,29(7).
Authors:Liu Biao  Liu Zili  Li Xiliang
Abstract:Effects of minor Sc addition on microstruc-ture and mechanical properties of the as-cast Mg-7Gd-3Y alloys at room temperature and at 200℃ were in-vestigated by optical microscope (OM), scanning elec-tron microscope and XRD. The results show that with 0. 5% Sc addition, the alloy at room temperature and at 200℃ is increased by 25MPa and 18MPa in tensile strength and by 28 MPa and 22MPa in yield strength as well as by 18.3% and 30.2% in elongation, respec-tively, as a result of promoting the precipitation of Mg24 (Y, Gd)5 and Mg5 (Gd, Y) phase and decreasing the relative content of Gd in Mg24 (Y, Gd)5 phase.
Keywords:Sc  Mg-7Gd-3Y Alloy  So  Microstructure  Mechanical Properties
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号