Bicyclo‐orthoester as a low‐shrinkage additive in cationic UV curing |
| |
| Authors: | Marco Sangermano Giulio Malucelli Gabriele Delleani Aldo Priola |
| |
| Affiliation: | 1. Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, ItalyDipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy;2. Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, C.so Duca degli Abruzzi 24, 10129 Torino, Italy |
| |
| Abstract: | A commercially available bicyclo‐orthoester (BOE) was used as low‐shrinkage additive for cationic UV curing of epoxy resins. A high reactivity of BOE by ring‐opening homopolymerization has been observed under cationic UV curing conditions. The BOE and trimethylolpropane triglycidyl ether monomers are compatible and give rise to a cured copolymeric network, under UV irradiation, with a flexibilization increase by increasing the BOE content in the photocurable formulation. Shrinkage after photopolymerization shows a linear reduction by increasing the BOE content in the photocurable formulation; a volume expansion upon polymerization is reached in the presence of 50 wt% of the additive. Copyright © 2007 Society of Chemical Industry |
| |
| Keywords: | cationic UV curing shrinkage bicyclo‐orthoester epoxy resins |
|
|
