| 高压缸体锻件冲盲孔方法研究 |
| |
| 引用本文： | 冯东林,周邴祚.高压缸体锻件冲盲孔方法研究[J].四川冶金,2007,29(1):17-18. |
| |
| 作者姓名： | 冯东林 周邴祚 |
| |
| 作者单位： | 攀钢集团成都钢铁有限责任公司四川省冶金机械厂,四川,成都,610500 |
| |
| 摘 要： | 介绍了高压缸体锻件冲深盲孔的原理,通过采用两次冲孔和煤粉“爆炸”脱模等方法实现对锻铁深盲孔的加工,此方法简单实用。可减轻高压缸体锻件重量,降低产品成本,用于类似深盲孔类锻件。
|
| 关 键 词： | 高压缸体 锻件 盲孔 冲孔 |
| 修稿时间： | 2006年11月20 |
STUDY ON PROCESS FOR PRESSING BLIND HOLE OF FORGED HI-PRESSURE CYLINDER CASING |
| |
| Feng Donglin,Zhou Binzuo.STUDY ON PROCESS FOR PRESSING BLIND HOLE OF FORGED HI-PRESSURE CYLINDER CASING[J].Sichuan Metallurgy,2007,29(1):17-18. |
| |
| Authors: | Feng Donglin Zhou Binzuo |
| |
| Abstract: | Described here in the article is the operating principle of pressing deep blind hole of forged hi-pressure cylinder casing involving the processing method of twice hole-pressing and mould-stripping by "explosion".Being simple and very practical,the said process method is advantageous in reducing both weight of the forged hi-pressure cylinder casing and manufacture cost thereof,and applicable to processing similar deep blind hole forgings. |
| |
| Keywords: | hi-pressure cylinder casing forging blind hole hole-pressing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
