首页 | 本学科首页   官方微博 | 高级检索  
     

磨细高钛高炉渣水化特性研究
引用本文:敖进清.磨细高钛高炉渣水化特性研究[J].钢铁钒钛,2004,25(4):42-46.
作者姓名:敖进清
作者单位:攀枝花钢铁研究院,四川,攀枝花,617000
摘    要:采用X射线衍射、SEM、EMPA、DTA等手段,用对比分析的方法,研究了攀钢磨细高钛高炉渣矿物组成、水化活性、水化产物以及水化过程特征。研究结果表明,攀钢磨细高钛高炉渣水化活性指数仅为77.4%,而普通高炉渣为108%。从水化产物的类型看,高钛高炉渣、普通矿渣、纯水泥三种物质具有相同的水化产物,高钛高炉渣的水化产物数量结晶度明显低于普通高炉渣,从微观结构上说明了攀钢高炉渣水化活性低的原因。

关 键 词:高炉渣  矿物组成  水化活性指数  水化产物  显微结构
文章编号:1004-7638(2004)04-0042-05
修稿时间:2004年8月14日

STUDY ON HYDRATION CHARACTERISTICS OF GROUNDED HIGH TITANIUM SLAG
AO Jin-qing.STUDY ON HYDRATION CHARACTERISTICS OF GROUNDED HIGH TITANIUM SLAG[J].Iron Steel Vanadium Titanium,2004,25(4):42-46.
Authors:AO Jin-qing
Abstract:The characteristics of grounded high titanium slag during the hydration process were discussed comparing with grounded low titanium one. The mineral composition, hydability and hydrating characteristics of grounded high titanium slag, and the hydration product were analyzed by means of X-ray diffraction analysis, SEM, EMPA, DTA separately. The results demonstrate that the hydaulic activation index of high titanium BF slag is 77.4% while that of slag with low titanium is 108%. The high titanium slag has the same hydration product as the low titanium slag and the portland cement. However, the amount and the crystallinity of hydration product in the high titanium BF slag are obviously lower than that in the low titanium slag. This means the high titanium slag has low hydaulic activation index.
Keywords:blast furnace slag  mineral composition  hydaulic activation index  hydration product  microstructure
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号