首页 | 本学科首页   官方微博 | 高级检索  
     

铝合金化对超高碳钢先共析碳化物析出行为的影响
引用本文:姜延飞,王宝奇,宋晓艳,李红娟,郭素珍. 铝合金化对超高碳钢先共析碳化物析出行为的影响[J]. 热加工工艺, 2005, 0(2): 1-3
作者姓名:姜延飞  王宝奇  宋晓艳  李红娟  郭素珍
作者单位:1. 河北工业大学,材料科学与工程学院,天津,300132
2. 北京工业大学,科学与工程材料学院,北京,100022
基金项目:河北省教委博士基金资助项目(534003),河北省自然科学基金资助项目(500023)
摘    要:
通过对不同铝含量超高碳钢的相平衡热力学计算、热处理工艺试验以及扫描电镜的微观组织观察,研究了铝合金化对超高碳钢先共析碳化物的数量和析出行为的影响。结果表明,对碳含量为1.6%的超高碳钢,添加2%以上的铝,可以显著抑制先共析网状碳化物的析出。铝的添加,导致平衡状态下的先共析碳化物数量减少,尤其在2%Al附近,更为显著,是铝合金化抑制超高碳钢网状碳化物的主要原因。

关 键 词:超高碳钢 热力学计算 铝合金化 先共析碳化物
文章编号:1001-3814(2005)02-0001-03
修稿时间:2004-10-13

Effect of Aluminium Alloying on Precipitation Behaviour of Proeutectoid Carbide in Ultra-high Carbon Steels
JIANG Yan-fei,WANG Bao-qi,SONG Xiao-yan,LI Hong-juan,Guo Su-zhen. Effect of Aluminium Alloying on Precipitation Behaviour of Proeutectoid Carbide in Ultra-high Carbon Steels[J]. Hot Working Technology, 2005, 0(2): 1-3
Authors:JIANG Yan-fei  WANG Bao-qi  SONG Xiao-yan  LI Hong-juan  Guo Su-zhen
Affiliation:JIANG Yan-fei~1,WANG Bao-qi~1,SONG Xiao-yan~2,LI Hong-juan~1,Guo Su-zhen~1
Abstract:
The effect of aluminium alloying in different addition on the precitation behaviour and amount of proeutectoid carbide in ultrahigh carbon steels were investigated by phase equilibrium thermodynamics calculation and SEM analysis for the microstructure after quenching.The results show that the precipitation of proeutectoid carbide in net is inhibited remarkably in ultrahigh carbon steel (UHCs) containing with in 1.6%C+2%Al. The amount of proeutectoid carbide in UHCs decreases with the addition of aluminium, especially at the content with about 2%Al, which is the primary reason for the inhibitation of proeutectoid carbide.
Keywords:ultrahigh carbon steel  thermaldynaymics calculation  Al alloying  proeutectoid carbide
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号