对桉木胶合板液氮处理前后的动态弹性模量测量与分析 |
| |
引用本文: | 高子震,王正,张晓冬.对桉木胶合板液氮处理前后的动态弹性模量测量与分析[J].木工机床,2014(3):34-36. |
| |
作者姓名: | 高子震 王正 张晓冬 |
| |
作者单位: | 南京林业大学材料与工程学院 南京 210037 |
| |
摘 要: | 本文运用结构动力学理论,采用瞬态激励法分别测算了七层桉木(Eucalyptus)胶合板超低温(-196℃)处理前后的动弹性模量值2,并对测量结果进行了对比分析。结果表明:超低温(-196℃)处理后,桉木胶合板的动弹性模量值下降幅度5%左右,且其动弹性模量变异性减小。本研究以期为制作良好动态力学性能的绝缘箱产品提供新材料,具有较好的应用价值。
|
关 键 词: | 桉木(Eucalyptus)胶合板 超低温(-℃)处理 瞬态激励法 固有频率 动弹性模量 |
Eucalyptus plywood for handling dynamic elastic modulus properties of liquid nitrogen |
| |
Abstract: | In this paper, the theory of structural dynamics, transient excitation method were estimated using a seven Eucalyptus Plywood ultra-low temperature (-196 ℃) dynamic elastic modulus before and after 2, and measurement results were compared and analyzed. The results showed that: ultra-low temperature (-196 ℃) treatment, eucalyptus plywood dynamic elastic modulus decrease of about 5%, and the dynamic elastic modulus increased heterosexual reduced. In this study, for the production of a good dynamic mechanical properties of the insulation box products provide new materials with better value. |
| |
Keywords: | Eucalyptus plywood Ultra-low temperature (-196 ℃) treatment Transient excitationmethod Natural frequency MOE |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|