首页 | 本学科首页   官方微博 | 高级检索  
     

3-RRR型并联机构运动学研究
引用本文:殷宝麟,姜国栋,于峰,于影,梁艺. 3-RRR型并联机构运动学研究[J]. 佳木斯工学院学报, 2011, 0(5): 703-706,709
作者姓名:殷宝麟  姜国栋  于峰  于影  梁艺
作者单位:佳木斯大学机械工程学院,黑龙江佳木斯154007
基金项目:佳木斯大学科研基金资助项目(L2011-12)
摘    要:
针对3-RRR型并联机构的输入及输出构件间的位置关系展开研究.基于运动螺旋理论,分析了该机构的自由度性质,并确定了主动副的位置;建立了机构的逆运动学方程及正运动学方程,并对给定运动平台的位姿进行了数值计算,以验证所建立方程的正确性;研究了机构的运动解耦性以及运动平台的工作空间大小与连杆长度变化的关系;最后,对给定运动平台的运动方程下主动副的输出转角进行了数值仿真.

关 键 词:3-RRR并联机构  自由度  运动学方程  工作空间

Research on Kinematics of the 3-RRR Parallel Mechanism
YIN Bao-lin,JIANG Guo-dong,YU Feng,YU Ying,LIANG Yi. Research on Kinematics of the 3-RRR Parallel Mechanism[J]. , 2011, 0(5): 703-706,709
Authors:YIN Bao-lin  JIANG Guo-dong  YU Feng  YU Ying  LIANG Yi
Affiliation:(Department of Mechanical Engineering,Jiamusi University,Jiamusi 154007,China)
Abstract:
Research on the situational relation between the active member and the passive member of the 3-RRR parallel mechanism was presented in the paper.Based on screw theory,the DOF(degree of freedom) of the mechanism was calculated.And then the active joint was selected.Direct kinematics equations and inverse kinematics equations were derived.With the kinematics equations,position and pose of moving platform was calculated,and the effectiveness of equations was verified.Movement decoupling of the mechanism and the relation between the work space and the length of the limb were investigated.Lastly,with given motion trajectory of the moving platform,the actuating angles of the active joint were obtained through simulation calculation.
Keywords:3-RRR parallel mechanism  degree of freedom  kinematics equation  work space
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号